Real factory 4 post triple stacker car parking lift automatic hydraulic garage parking system vehicle car parking lift CE certification

Basic Info

Model NO.	PEP54/3500
Warranty	2 Years for Electric Parts, 5years for Steel Frame
Type	Parking Lift
Working Mode	electric operation
Driving	Hydraulic
Falling Prevention Device	Pull-Type
The Vehicle Inlet and Outlet	Down
Design	Four Post
Certification	CE, ISO, CCC, SGS
Lift Mode	Hydraulic Cylinder
Voltage	220V/380V/2.2kw
Lifting Capacity	2700 kg / platform, and 5400 kg totally
Max Lifting Height	1800/3500 mm
Platforms Length X Width	Lower : 4198 X 1900 mm & Upper : 4780 X 1900 mm
Runway type	Checkered steel plates
Brand of oil seals in cylinder	Aston , Italy
packaging dimension	3760 * 940 * 570 mm
operation method	electric operation with operation panel
quantity per 40′ container	24 units
safety device	double safety locks
Motor Capacity	2 separate units each is 2.2 Kw.
Lock release type	Electromagnetic lock release
Middle in the runway	4 ea plastic oil trays in the middle of runway
Transport Package	Steel Pallets+ Air Bubbles Plastic Wrapping+ Strap
Specification	6577 *2682*4001 mm
Trademark	GG LIFTERS
Origin	China
HS Code	84289020
Production Capacity	300pieces/Month

Product Description

Real factory 4 post triple stacker car parking lift automatic hydraulic garage parking system vehicle car parking lift CE certification

1. For independent parking, Directly park or pick up the car at any level independently.
2. Double wide platforms make it avaiable for 4 cars hidden underground, 2 cars at each level, space saving. Top platform is used as roof & drive through. Hide cars underground, no visible impact! People or cars could go thought on the top platform.
3. Offer the most net width within narrow external width. Net entrance width could be 5400mm in pit with width of 5850mm!
4. Top platform is made of diamond plate and lower platform is galvanized wave plates.
5. Hydraulic driven through 4 ea hydraulic cylinders system and chain balance system.
6. Control valve group (package) to divide oil equally to the 4 cylinders and control the hydraulic system.
7. Simple steel structure, easy for installation and maintenance.
8. Electric operation box is equipped with "Dead Man" Push Buttons (UP/Down) & Emergency and ON/ OFF "Key Switch "where the user can't take it out unless the lift is fully down inside the pit.
9. Electric Operation Box is operated by 24 V to protect against short circuit.
10. 1 ea limit switch in every level to stop platforms at predefined heights.
11. Electric sensors to confirm no persons or objects before rising up/down the platforms.
12. Front and back wave plates are removable for easy access to the pit ground floor in case of emergency.
13. Tire stoppers in each platform to ensure correct placement of the car.
14. Hydraulic power unit is fixed on the front together with facility steel structure under upper platform.
15. Flexible design according to customer requirements, suitable for residential & commercial use.
16. Units are designed and built according to EN1493: 2010 and EN14010: 2003 standards.

Model	PEP54 /3500
Lifting capacity	2700 kg / platform, and 5400 kg totally
Net lifting Height	1800/3500 mm
Unit External dimensions	6575 *2752*4065 mm
Platforms Length x Width	Lower : 4198 x 1966 mm & Upper : 4780 x 1966 mm
Runway type	Checkered steel plates
Electric parts	Original Chint
Brand of oil seals in cylinder	Aston , Italy
Lock release type	Electromagnetic lock release
Middle in the runway	4 ea plastic oil trays in the middle of runway
Type of ramp	Foldable ramps
Safety Devices	One piece adjustable safety lock ladder and the other is activated automatically in case of steel wire rupture
Operation Type	Push buttons on operation box
Power Supply	380/ 220 V , 50/60 Hz , 1/3 Ph
Motor Capacity	2 separate units each is 2.2 Kw.